NOKIA TA-1086 LOGO HANG SOLUTION
NOKIA 2.1 DEAD AFTER FLASH FIX SOLUTION
1. FIRST DOWNLOAD DRIVER
IF SHOWING ONLY 9008 PORT DONT WORRY
2. DOWNLOAD THE FILE
NOKIA TA-1086 DEAD BOOT REPAIR FILE
SELECT FLASH FILE
AND CLICK FLASH IT WILL TAKE SOME TIME JUST WAIT
Brand : Nokia
Operation : Flash Firmware (nb0)
Checking for existing devices…Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone…OK
Waiting for response…OK
Init Handshake Sequence…OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol…OK
Loading Boot Loader from package…Done
Sending Loader…Done
Executing Loader…OK
Detecting Chip Type…OK
Hardware : 8917, EMMC, 2 GB
LU Count : 0
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Writing [E2M-3-411F-NON-HLOS.bin] -> [modem]…Done
Writing [E2M-0-411F-emmc_appsboot.mbn] -> [aboot]…Done
Writing [E2M-0-411F-emmc_appsboot.mbn] -> [abootbak]…Done
Writing [E2M-0-411F-00WW-boot.img] -> [boot]…Done
Writing [E2M-0-411F-00WW-recovery.img] -> [recovery]…Done
Writing [E2M-0-411F-00WW-system.img] -> [system]…Done
Writing [E2M-0-411F-00WW-vendor.img] -> [vendor]…Done
Writing [E2M-0-411F-cmnlib_30.mbn] -> [cmnlib]…Done
Writing [E2M-0-411F-cmnlib_30.mbn] -> [cmnlibbak]…Done
Writing [E2M-0-411F-cmnlib64_30.mbn] -> [cmnlib64]…Done
Writing [E2M-0-411F-cmnlib64_30.mbn] -> [cmnlib64bak]…Done
Writing [E2M-0-411F-keymaster64.mbn] -> [keymaster]…Done
Writing [E2M-0-411F-keymaster64.mbn] -> [keymasterbak]…Done
Writing [E2M-00WW-011-splash.img] -> [splash]…Done
Writing [E2M-0-411F-sbl1.mbn] -> [sbl1]…Done
Writing [E2M-0-411F-sbl1.mbn] -> [sbl1bak]…Done
Writing [E2M-0-411F-rpm.mbn] -> [rpm]…Done
Writing [E2M-0-411F-rpm.mbn] -> [rpmbak]…Done
Writing [E2M-0-411F-tz.mbn] -> [tz]…Done
Writing [E2M-0-411F-tz.mbn] -> [tzbak]…Done
Writing [E2M-0-411F-devcfg.mbn] -> [devcfg]…Done
Writing [E2M-0-411F-devcfg.mbn] -> [devcfgbak]…Done
Writing [E2M-0-411F-adspso.bin] -> [dsp]…Done
Writing [E2M-0-411F-NV-default.mbn] -> [default_nv]…Done
Writing [E2M-0-411F-hwcfg.img] -> [hwcfg]…Done
Writing [E2M-00WW-001-sutinfo.img] -> [sutinfo]…Done
Writing [systeminfo.img] -> [systeminfo]…Done
Writing [E2M-0-0020-0001-hidden.img] -> [hidden]…Done
Writing [E2M-0-411F-00WW-cache.img] -> [cache]…Done
Writing [E2M-0-411F-00WW-mdtp.img] -> [mdtp]…Done
Writing [E2M-0-411F-gpt_main0.bin] -> [PrimaryGPT]…Done
Writing [E2M-0-411F-gpt_backup0.bin] -> [BackupGPT]…Done
Applying Patches…………….Done
Resetting FRP…Done
Setting Bootable Stroage Drive to 0…Done
Operation Finished.
QcFire Ver. 8.3.1
